close
Choose Your Site
Global
Social Media
 |
| Quantity: | |
|---|---|
NA-2821PS
DWD
DDESCRIPTION:
This model machine is designed according to European market. As in European country, panel size normally is 2070*2745mm,so we designed working size to be 2100*2800mm. America Zebra printer installed beside of gantry, so before drilling and cutting, machine will print all labels and paste it on correct position automatically. And there is unloading device installed under gantry, after cutting ,this machine can unload all finished panels to the front belt(this is optional part),which will save a lot of worker's labor.
Model NA-2821PS is an automatic labeling nesting router platform built for cabinet making and panel furniture workflows, with a working size of 2100 × 2800 × 150 mm to match common European panel sizes (the page notes panels around 2070 × 2745 mm). In daily production, it functions as a CNC Wood Drilling Machine by printing labels beside the gantry, automatically pasting them in the correct position, then proceeding into drilling and cutting. For factories sourcing a CNC Wood Drilling Machine for Furniture, this automated labeling step helps keep every part identified before drilling, slotting, and cutting begin, reducing operator handling on large panels.
For throughput focused lines, the machine can be equipped with an unloading device installed under the gantry to unload finished panels to the front side (the page describes a front belt as an optional part), saving labor after cutting. The FAQ section also states optional configurations such as an automatic loading and unloading table and an optional drilling head, which strengthens its role as a CNC Wood Drilling Machine for Furniture when your workflow needs both nesting and drilling capability. If your RFQ includes Heavy CNC Wood Drilling Machine requirements for continuous cabinet production, the NA-2821PS workflow is built around automatic labeling plus drilling and cutting in one controlled sequence.
Cutting and tool handling are designed for multi process cabinet jobs. The standard spindle is a 12HP air cooling automatic tool change spindle using ER32 collet and ISO30 tool holders, with spindle speed from 3000 to 24000 RPM. A 12 position linear tool magazine is installed at the back of the machine with a protective cover under the magazine, and the system includes automatic tool calibration that measures tool length automatically; an air pipe cleans dust off the tool sensor surface to keep accuracy. These details support stable repeatability when the CNC Wood Drilling Machine runs multiple tools for drilling, slotting, and cutting on cabinet panels.
Clean production and panel stability are emphasized. The page describes a dust free vacuum hood designed for panel furniture production, with air blast in four directions to lift dust so the dust collector can remove about 90 percent of dust through pipes, plus a movable dust collection device that reduces the need for longer dust pipes. The nesting vacuum table includes a large vacuum chamber between two layers to improve adsorption, and big screws are provided to fix the sacrificial MDF sheet for easier setup. Material alignment stops help keep panel position so operators do not need to reset working origins repeatedly, which is especially important when you drill holes on both sides of one panel, a common CNC Wood Drilling Machine for Furniture requirement.
Key parameters on the page include travelling speed 50 m/min, spindle 9 kW ISO30, and overall machine dimension 4200 × 2260 × 2150 mm, with a servo driving system and an industrial CNC controller. The FAQ also confirms CE certificate and Declaration of Conformity, and notes file requirements for the labeling workflow: besides standard NC files, the machine also needs XML and BMP pictures for labels. For buyers searching CNC Wood Drilling Machine, CNC Wood Drilling Machine for Furniture, or Heavy CNC Wood Drilling Machine keywords, this NA-2821PS description highlights an integrated labeling plus drilling and cutting workflow sized for European cabinet panels.
Except panel furnitures, this machine can also do other work and cut all the other material
3D Carving
Acrylic Fabrication
Aluminum Fabrication
Architectural Millwork
Woodworking Applications
ADVANTAGE OF THIS MACHINE:
1 Automatic Label Function：Cause big working size of panel, it is not easy to paste label manually,so this automatic label function will be very efficient and important. Machine will paste labels on the panel,after that machine will drilling slotting and cutting.
2 Dust-Free Cutting Technology: Adopts advanced dust-free cutting technology to ensure no residue dust during cutting, maintaining a clean work environment thereby improving work efficiency.
3 Movable Dust Collection Device:Equipped with this special design, no need to install longer dust collector pipes,enhancing equipment durability.
FREQUENT ASKED QUESTIONS:
1 What is maximum cutting size of this machine? Or Can i customize maximum cutting size of nesting cnc machine?
The maximum cutting size of this nesting cnc router is 2100*2800mm,which is suitable for European panel size 2070*2800mm. And you can also customize machine size if you have bigger size needed.
2 Will there be instructions attached with machine,which i can follow to learn how to operate this cnc nesting machine?
There is one pen driver attached in machine tool box, in which there is instructions operation and maintenance,besides we have YouTube videos to show installation and operation of cnc router machine,except all of this ,you can choose to video chat with our engineer directly.
3 What g-code does the machine read?Can we integrate a post processor into our current software?
As this machine has auto labeling function ,so except standard .nc file,it also need XML and BMP pictures for label.You can ask sales engineers to send you detail format and explanation of files and show it to your software supplier. But this machine can definitely work with your software for sure.
4 Is there any other optional for this nesting cnc?
You can choose automatically loading and unloading table for this machine,and also you can choose one drilling head for this machine.
5 We need a Declaration of Conformity,a CE certificate, does this machine have it?
Yes,there is CE certificate and Declaration of Conformity for this machine.
FACTORY SITES:
FEATURES
• 1 | Big working size working size is 2100*2800mm which is suitable for European standard panel |
|
• 2 | Automatic labeling Equiped with America Zebra printer, this machine can labeling before drilling and cutting, besides installed beside of gantry ,no big area for this machine working . |
|
• 3 | Spindle It comes standard with 12HP air cooling automatic tool change spindle with standard ER32 collet and ISO30 tool holders.Its spindle speed is from 3000 to 24000RPM |
|
• 4 | Dust free vacuum hood It is specially designed for panel furniture production.There are air blast in four different directions, so when tool cutting the panel, air will blow dust up, then dust collector can remove 90 percentage dust by pipes. |
|
• 5 | Material alignment stops These material alignment stops plays a very important role during panel alignment. It can keeps panel positions so there is no need for operator to change working origins always, they just need set it one time.And it is very important in wardrobe cabinet production.Because sometimes we need drill holes on one panel both sides, those alignment stops will keeps accuracy of those holes. |
|
• 6 | 12- position linear tool magazine This linear tool magazine is installed back of machine ,and under tool magazine, we installed one protect cover . If tool drops out of plastic tool pocket,this cover will protect tool from dropping to the floor and damage |
|
• 7 | Nesting vacuum table There is one big vacuum chamber between two layer of nesting vacuum table,this will improve absorption capability of vacuum table, thus panel material will be hold tightly.Besides we have installed big screws in vacuum table which are used to fix sacrificed MDF sheet,it is much more easier for operator compared to gluing. |
|
• 8 | Tool calibration Automatic tool calibration will measure all tools length automatically,thus controller will know very accurate length of each tool, then machine will finish multi tool process smoothly. Besides there is one air pipe beside the tool calibration, before tool calibration, the air pipe will open to remove dust on the surface of tool sensor, which will keeps high accuracy. |
|
• 9 | Tool holder clamp This holder clamp supply one easy way for operator to change tool manually only with one ER32 wrench.Compared normal way to tight collet nut with two wrenches,this way is not only safer,but also it can protect tools in the spindle. |
|
• 10 | Automatic unloading device After cutting, this device can unload all finished panels ,which saves a lot of time for picking up panels. |
|
• 11 | Plastic drag chain We separate encoder cable ,motor cable,and air pipe when we install then into plastic drag chain by plastic isolator. Thus encoder signal will not affacted by motor cable with high voltage,at the same time, it will protect those cables and pipes. |
|
PARAMETER:
| Series | NA-2821PS |
| Working size | 2100*2800*150mm |
| Spindle | 9kw ISO30 |
| Travelling speed | 50m/min |
| Driving system | SYNTEC servo |
| Controller | Syntec |
| Dimension | 4200*2260*2150mm |
EXHIBITION:
Our factory attend Guangzhou CIFF & Shanghai CIFF exhibition every year, and attend Vietnam exhibition every two years. And now we will attend exhibitions in foreign countries more and more.
DDESCRIPTION:
This model machine is designed according to European market. As in European country, panel size normally is 2070*2745mm,so we designed working size to be 2100*2800mm. America Zebra printer installed beside of gantry, so before drilling and cutting, machine will print all labels and paste it on correct position automatically. And there is unloading device installed under gantry, after cutting ,this machine can unload all finished panels to the front belt(this is optional part),which will save a lot of worker's labor.
Model NA-2821PS is an automatic labeling nesting router platform built for cabinet making and panel furniture workflows, with a working size of 2100 × 2800 × 150 mm to match common European panel sizes (the page notes panels around 2070 × 2745 mm). In daily production, it functions as a CNC Wood Drilling Machine by printing labels beside the gantry, automatically pasting them in the correct position, then proceeding into drilling and cutting. For factories sourcing a CNC Wood Drilling Machine for Furniture, this automated labeling step helps keep every part identified before drilling, slotting, and cutting begin, reducing operator handling on large panels.
For throughput focused lines, the machine can be equipped with an unloading device installed under the gantry to unload finished panels to the front side (the page describes a front belt as an optional part), saving labor after cutting. The FAQ section also states optional configurations such as an automatic loading and unloading table and an optional drilling head, which strengthens its role as a CNC Wood Drilling Machine for Furniture when your workflow needs both nesting and drilling capability. If your RFQ includes Heavy CNC Wood Drilling Machine requirements for continuous cabinet production, the NA-2821PS workflow is built around automatic labeling plus drilling and cutting in one controlled sequence.
Cutting and tool handling are designed for multi process cabinet jobs. The standard spindle is a 12HP air cooling automatic tool change spindle using ER32 collet and ISO30 tool holders, with spindle speed from 3000 to 24000 RPM. A 12 position linear tool magazine is installed at the back of the machine with a protective cover under the magazine, and the system includes automatic tool calibration that measures tool length automatically; an air pipe cleans dust off the tool sensor surface to keep accuracy. These details support stable repeatability when the CNC Wood Drilling Machine runs multiple tools for drilling, slotting, and cutting on cabinet panels.
Clean production and panel stability are emphasized. The page describes a dust free vacuum hood designed for panel furniture production, with air blast in four directions to lift dust so the dust collector can remove about 90 percent of dust through pipes, plus a movable dust collection device that reduces the need for longer dust pipes. The nesting vacuum table includes a large vacuum chamber between two layers to improve adsorption, and big screws are provided to fix the sacrificial MDF sheet for easier setup. Material alignment stops help keep panel position so operators do not need to reset working origins repeatedly, which is especially important when you drill holes on both sides of one panel, a common CNC Wood Drilling Machine for Furniture requirement.
Key parameters on the page include travelling speed 50 m/min, spindle 9 kW ISO30, and overall machine dimension 4200 × 2260 × 2150 mm, with a servo driving system and an industrial CNC controller. The FAQ also confirms CE certificate and Declaration of Conformity, and notes file requirements for the labeling workflow: besides standard NC files, the machine also needs XML and BMP pictures for labels. For buyers searching CNC Wood Drilling Machine, CNC Wood Drilling Machine for Furniture, or Heavy CNC Wood Drilling Machine keywords, this NA-2821PS description highlights an integrated labeling plus drilling and cutting workflow sized for European cabinet panels.
Except panel furnitures, this machine can also do other work and cut all the other material
3D Carving
Acrylic Fabrication
Aluminum Fabrication
Architectural Millwork
Woodworking Applications
ADVANTAGE OF THIS MACHINE:
1 Automatic Label Function：Cause big working size of panel, it is not easy to paste label manually,so this automatic label function will be very efficient and important. Machine will paste labels on the panel,after that machine will drilling slotting and cutting.
2 Dust-Free Cutting Technology: Adopts advanced dust-free cutting technology to ensure no residue dust during cutting, maintaining a clean work environment thereby improving work efficiency.
3 Movable Dust Collection Device:Equipped with this special design, no need to install longer dust collector pipes,enhancing equipment durability.
FREQUENT ASKED QUESTIONS:
1 What is maximum cutting size of this machine? Or Can i customize maximum cutting size of nesting cnc machine?
The maximum cutting size of this nesting cnc router is 2100*2800mm,which is suitable for European panel size 2070*2800mm. And you can also customize machine size if you have bigger size needed.
2 Will there be instructions attached with machine,which i can follow to learn how to operate this cnc nesting machine?
There is one pen driver attached in machine tool box, in which there is instructions operation and maintenance,besides we have YouTube videos to show installation and operation of cnc router machine,except all of this ,you can choose to video chat with our engineer directly.
3 What g-code does the machine read?Can we integrate a post processor into our current software?
As this machine has auto labeling function ,so except standard .nc file,it also need XML and BMP pictures for label.You can ask sales engineers to send you detail format and explanation of files and show it to your software supplier. But this machine can definitely work with your software for sure.
4 Is there any other optional for this nesting cnc?
You can choose automatically loading and unloading table for this machine,and also you can choose one drilling head for this machine.
5 We need a Declaration of Conformity,a CE certificate, does this machine have it?
Yes,there is CE certificate and Declaration of Conformity for this machine.
FACTORY SITES:
FEATURES
• 1 | Big working size working size is 2100*2800mm which is suitable for European standard panel |
|
• 2 | Automatic labeling Equiped with America Zebra printer, this machine can labeling before drilling and cutting, besides installed beside of gantry ,no big area for this machine working . |
|
• 3 | Spindle It comes standard with 12HP air cooling automatic tool change spindle with standard ER32 collet and ISO30 tool holders.Its spindle speed is from 3000 to 24000RPM |
|
• 4 | Dust free vacuum hood It is specially designed for panel furniture production.There are air blast in four different directions, so when tool cutting the panel, air will blow dust up, then dust collector can remove 90 percentage dust by pipes. |
|
• 5 | Material alignment stops These material alignment stops plays a very important role during panel alignment. It can keeps panel positions so there is no need for operator to change working origins always, they just need set it one time.And it is very important in wardrobe cabinet production.Because sometimes we need drill holes on one panel both sides, those alignment stops will keeps accuracy of those holes. |
|
• 6 | 12- position linear tool magazine This linear tool magazine is installed back of machine ,and under tool magazine, we installed one protect cover . If tool drops out of plastic tool pocket,this cover will protect tool from dropping to the floor and damage |
|
• 7 | Nesting vacuum table There is one big vacuum chamber between two layer of nesting vacuum table,this will improve absorption capability of vacuum table, thus panel material will be hold tightly.Besides we have installed big screws in vacuum table which are used to fix sacrificed MDF sheet,it is much more easier for operator compared to gluing. |
|
• 8 | Tool calibration Automatic tool calibration will measure all tools length automatically,thus controller will know very accurate length of each tool, then machine will finish multi tool process smoothly. Besides there is one air pipe beside the tool calibration, before tool calibration, the air pipe will open to remove dust on the surface of tool sensor, which will keeps high accuracy. |
|
• 9 | Tool holder clamp This holder clamp supply one easy way for operator to change tool manually only with one ER32 wrench.Compared normal way to tight collet nut with two wrenches,this way is not only safer,but also it can protect tools in the spindle. |
|
• 10 | Automatic unloading device After cutting, this device can unload all finished panels ,which saves a lot of time for picking up panels. |
|
• 11 | Plastic drag chain We separate encoder cable ,motor cable,and air pipe when we install then into plastic drag chain by plastic isolator. Thus encoder signal will not affacted by motor cable with high voltage,at the same time, it will protect those cables and pipes. |
|
PARAMETER:
| Series | NA-2821PS |
| Working size | 2100*2800*150mm |
| Spindle | 9kw ISO30 |
| Travelling speed | 50m/min |
| Driving system | SYNTEC servo |
| Controller | Syntec |
| Dimension | 4200*2260*2150mm |
EXHIBITION:
Our factory attend Guangzhou CIFF & Shanghai CIFF exhibition every year, and attend Vietnam exhibition every two years. And now we will attend exhibitions in foreign countries more and more.
