close
Choose Your Site
Global
Social Media
 |
| Quantity: | |
|---|---|
NM-1531 CNC ROUTER MACHINE
DESCRIPTION:
NM series cnc router machine is economic model specially designed for wood engraving.One 3.7kw spindle are equipped with machine for cutting,routing,slotting and milling.Compared with normal cnc router, this machine adopts PC-based Mach3 controller,double-layer nesting vacuum table
FEATURES
• 1 | Spindle It comes standard with one 3.5kw air cooling spindle ER25 |
|
• 2 | Material alignment stops These material alignment stops plays a very important role during panel alignment. It can keeps panel positions so there is no need for operator to change working origins always, they just need set it one time.And it is very important in wardrobe cabinet production.Because sometimes we need drill holes on one panel both sides, those alignment stops will keeps accuracy of those holes. |
|
• 3 | Tool calibration This movable tool sensor will ensure tool length accuracy,after we change tool, we just need put tool sensor on the top of material and then calibrate new tool again. |
|
• 4 | Vacuum zones 8 vacuum zones is standard ,which is convenient for different size material |
|
PARAMETER:
| Series | NM-1531 |
| Working size | 1500*3100*200MM |
| Spindle | 3.5kw air cooling |
| Travelling speed | 25m/min |
| Controller | Mach 3 controller |
| Voltage | AC220V/AC380V,50/60HZ,1PH/3PH |
| Dimension | 3800*2260*2150MM |
NM-1531 CNC ROUTER MACHINE
DESCRIPTION:
NM series cnc router machine is economic model specially designed for wood engraving.One 3.7kw spindle are equipped with machine for cutting,routing,slotting and milling.Compared with normal cnc router, this machine adopts PC-based Mach3 controller,double-layer nesting vacuum table
FEATURES
• 1 | Spindle It comes standard with one 3.5kw air cooling spindle ER25 |
|
• 2 | Material alignment stops These material alignment stops plays a very important role during panel alignment. It can keeps panel positions so there is no need for operator to change working origins always, they just need set it one time.And it is very important in wardrobe cabinet production.Because sometimes we need drill holes on one panel both sides, those alignment stops will keeps accuracy of those holes. |
|
• 3 | Tool calibration This movable tool sensor will ensure tool length accuracy,after we change tool, we just need put tool sensor on the top of material and then calibrate new tool again. |
|
• 4 | Vacuum zones 8 vacuum zones is standard ,which is convenient for different size material |
|
PARAMETER:
| Series | NM-1531 |
| Working size | 1500*3100*200MM |
| Spindle | 3.5kw air cooling |
| Travelling speed | 25m/min |
| Controller | Mach 3 controller |
| Voltage | AC220V/AC380V,50/60HZ,1PH/3PH |
| Dimension | 3800*2260*2150MM |
