You are here: Home » CNC Router » cnc nesting machine » Professional High Quality cabinet making cnc router for cabinet making


Share to:

Professional High Quality cabinet making cnc router for cabinet making



cabinet making cnc router


NA series nesting cnc router machine is widely used in high volume furniture shops.12-position linear tool magazine ensures that machine can produce complex products with routing,engraving,slotting,drilling,cutting and so on.On the other hand,this linear tool magazine locates back of machine.This kind of tool magazine is suitable for machining higher materail It comes standard with one 12HP automatic tool change spindle which ensures smooth and fast cutting,higher cutting strength can also reduce the loss of the tool. New dust free dust collector hood will remove nearly all dust during cutting,which is very important to furniture shops.Double layer nesting vacuum table can hold panel material tightly.There are big vacuum chamber between those two layer vacuum table, which will supply high absorption capability when vacuum pump is on.



Machine structure

All machine structure are welded by heavy duty tubular.After stress relieved,we use 5 axis cnc machining center to machine this total machine structure,which lays the foundation of higher accuracy of linear rail and rack installation.

cnc structure


Gantry support

All gantry support is made from cast iron.After precision machining,it has three to five times more compression strength compared to steel.and it has good machinability ,durability and excellent anti-vibration properties.




It comes standard with 12HP air cooling automatic tool change spindle with standard ER32 collet and ISO30 tool holders.Its spindle speed is from 3000 to 24000RPM

ATC spindle


Dust free vacuum hood

It is specially designed for panel furniture production.There are air blast in four different directions, so when tool cutting the panel, air will blow dust up, then dust collector can remove 90 percentage dust by pipes.

cabinet nesting cnc router


Material alignment stops

These material alignment stops plays a very important role during panel alignment. It can keeps panel positions so there is no need for operator to change working origins always, they just need set it one time.And it is very important in wardrobe cabinet production.Because sometimes we need drill holes on one panel both sides, those alignment stops will keeps accuracy of those holes.

vacuum cnc table


12- position linear tool magazine

This linear tool magazine is installed back of machine ,and under tool magazine, we installed one protect cover . If tool drops out of plastic tool pocket,this cover will protect tool from dropping to the floor and damage

linear tool magazine


Nesting vacuum table

There is one big vacuum chamber between two layer of nesting vacuum table,this will improve absorption capability of vacuum table, thus panel material will be hold tightly.Besides we have installed big screws in vacuum table which are used to fix sacrificed MDF sheet,it is much more easier for operator compared to gluing.

nesting cncmachine


Tool calibration

Automatic tool calibration will measure all tools length automatically,thus controller will know very accurate length of each tool, then machine will finish multi tool process smoothly. Besides there is one air pipe beside the tool calibration, before tool calibration, the air pipe will open to remove dust on the surface of tool sensor, which will keeps high accuracy.

tool calibration


Tool holder clamp

This holder clamp supply one easy way for operator to change tool manually only with one ER32 wrench.Compared normal way to tight collet nut with two wrenches,this way is not only safer,but also it can protect tools in the spindle.

tool holder


Handle controller

NK105G3 handle controller, which is convenient for operation

NK105G3 controller


Plastic drag chain

We separate encoder cable ,motor cable,and air pipe when we install then into plastic drag chain by plastic isolator. Thus encoder signal will not affacted by motor cable with high voltage,at the same time, it will protect those cables and pipes.

router cnc



X Y axis vertical accuracy

After adjusting verticality of x y axis is less than 0.03mm,then we install location pins between gantry and gantry support.


Adjustable screws

After adjusting verticality of x y axis is less than 0.03mm,we also install adjustable screws between gantry and gantry support.(there is one adjustable screw together on each gantry support)


Spindle vertical accuracy

spindle verticality is also very important. First we adjust spindle verticality less than 0.03mm,then we install location pins on spindle plate


Fasten screws for sacrifice mdf

We installed many screws on nesting vacuum table, which fixed sacrifice mdf panel tightly to vacuum table.This will improve good absorption ability of vacuum table.


Series NA-1230
Working size 1220*3000*150MM
Spindle 9.0KW ISO30
Travelling speed 50M/MIN
Driving system Inovance 750W
Controller NK105G3 handle controller
Voltage AC380V/220V,50/60HZ,3PH
Dimension 4150*2260*2150MM


Quick Link

CNC Drilling Machine

Edge Bander

CNC Router

Leave A Message

Leave A Message